1. Home
  2. Docs
  3. H60 Gateway Manual
  4. Terminal access (advanced)

Terminal access (advanced)

H60 has a serial terminal interface. This can be usefull if you run in to issues with H60 and it cant connect to the network. Through the terminal interface you can monitor exacly what is going on and all settings can be altered.

To access the terminal interface, follow this guide (for Windows 10)

  1. Disconnect H60 from Heat Pump and move the unit to the computer.
  2. Connect H60 to computer using a USB to micro-USB cable.
  3. In Device Manager, select Ports and check the COM port number H60 having (Called CH340)
  4. If a COM port is not showing the driver nee to be installed. https://sparks.gogo.co.nz/ch340.html
  5. Next download and install the Putty terminal software. https://www.putty.org/
  6. Right click on start menu Windows symbol in left corner and select Device Manager
  7. Start Putty and connect to the H60 COM port (as noted in step 3) using baudrate 115200

Now when connected you can use different commands.

CFG + enter (list all config. Is the Wifi SSID and password correct?)

CFG setting=1234 to change setting

STATUS

How can we help?